Status Messages - Epson Stylus Pro 7600 Reference Manual

Sheet
Sheet
All lights On

Status messages

The following messages show the printer status. For error
messages, see "Printer Stops Printing Unexpectedly".
READY
PRINTING
POWER OFF
WAIT
INK CHARGING
PAUSE
RESET
PRESS PAUSE BUTTON
PAPER OUT
LOAD XXXXX PAPER
Sheet is selected. Printing is on single sheet paper. The
printer ejects the paper.
Sheet is selected in the printer driver, but Roll Auto Cut
or Roll Cutter Off is selected at the control panel.
Reset has been executed by pressing the Pause button
for 3 seconds or more.
Ready to print data
The printer is processing data.
The printer is being turned off.
The printer is warming up, charging ink or
initializing.
The printer is charging ink delivery
system. This message shows the progress
of the ink charging process.
The printer is paused. To resume printing,
press the PAUSE button.
The printer is being reset.
The printer is waiting for a trigger signal
to start media initialization.
No media is set in the printer.
The set media is different from the driver
setting concerning the Roll/Sheet media
setting.
52