Epson Stylus Pro 7600 Reference Manual page 153

❏ 400mm to 16in (406.4mm)
❏ 500mm to 20in (508mm)
❏ 600mm to 24in (609.6mm)
❏ 910mm to 36in (914.4mm) (for Stylus Pro 9600 only)
❏ 1110mm to 1118mm (for Stylus Pro 9600 only)
Note:
❏ If your application has margin settings, make sure they are set to
zero before printing.
❏ When printing on cut sheet media, only the left and right margins
are set to zero.
❏ The ink may contaminate the platen of the printer. In this case, wipe
the ink away using a cloth.
❏ Printing with this feature selected takes longer than for normal
printing.
❏ To prevent a decline in print quality or smearing in the top part of
the printout, EPSON recommends the media listed above or media
designated for no-margin printing in the manual accompanying the
media.
❏ For dye ink system printers:
This print mode cannot be set when printing at a resolution of 2880
dpi.
How to print with No Margins mode
Follow the steps below to print using the No Margins mode.
1. Enlarge your image data 3mm in both the left and right
directions by using the application with which you made the
data.
152