Performing The Head Alignment - Epson Stylus Pro 7600 Reference Manual

Nozzle check pattern examples:
good
head cleaning necessary
If you find that any segments are missing from the test lines in the
pattern, you need to clean the print heads. Press the Cleaning
button on the control panel for more than 3 seconds or access the
Head Cleaning utility from the EPSON printer utilities in your
software. See "Using the Printer Utilities".
Caution:
c
Before you start printing images, make sure that the nozzle check
pattern printing is complete. Otherwise, print quality may
decline.

Performing the head alignment

How to perform the head alignment by SelecType is described
below.
Aligning the print heads
To align the print heads, follow the steps below.
1. Load paper in your printer as described in "Using Roll Paper"
or "Using Cut Sheet Media".
69