Using The Roll Paper Belt; Cutting Roll Paper Or Printing Page Lines - Epson Stylus Pro 7600 Reference Manual

Using the roll paper belt

To keep the roll paper wound up, use the roll paper belt packed
with your printer.
Tap the end of the roll paper belt lightly on the roll paper. The belt
will wrap itself around the roll paper.
To remove the roll paper belt, simply unwrap it from around the
paper. While you do not use the roll paper belt, keep it wound
around the end of the spindle.

Cutting roll paper or printing page lines

When your print job is finished, the printer cuts the roll paper
automatically or prints page lines around the document
according to your settings. You can make these settings using the
control panel or printer software.
Note:
Software usually overrides control panel settings. Use your software to
make settings whenever possible.
181