Epson Stylus Pro 7600 Reference Manual page 68

CUT METHOD
Specifies the cutting method. There are two ways to cut paper
(3 STEP and 4 STEP). Select 4 STEP for cutting weaker or thicker
paper.
PPR FEED ADJ
Sets the paper feed amount. The range is -1.00 to 1.00%.
DRYING TIME
Sets the ink drying time per print head pass. The range is 0 to 5
seconds.
SUCTION
Sets the suction pressure for feeding the printed paper. If you use
a thin paper, such as film, select LOW.
PRINT ADJ
Adjusts the MicroWeave mode. The setting range is 1 to 5.
Increase the value to give priority to the printing speed. Decrease
it to give priority to the print quality.
MAINTENANCE
This menu contains following items.
PWR CLEANING
Allows you to clean the print head more effectively than normal
head cleaning.
BK INK CHANGE
Enables you to replace ink cartridges for the most desirable
printing. See "Replacing Black Ink Cartridges" for the details.
67