Selectype Settings - Epson Stylus Pro 7600 Reference Manual

WRONG INK CARTRIDGE
INVALID INK CARTRIDGE
MAINTENANCE TANK ALMOST
FULL
CHANGE MAINTENANCE TANK
NO MAINTENANCE TANK
PAPER NOT CUT
NOT ENOUGH INK
REMOVE PAPER
UNABLE TO PRINT

SelecType Settings

When to use SelecType
The SelecType mode enables you to make printer settings similar
to those you would normally make in the driver or software, as
well as other additional settings—directly through the control
panel. Keep the following points in mind when making SelecType
settings:
❏ Application programs may send commands to the printer that
override SelecType settings. If you are not getting the results
you expect, check your application settings.
This message is displayed when a wrong
type of ink cartridge is installed.
This message is displayed if an ink
cartridge with the wrong product
number is installed.
The maintenance tank is almost full.
The maintenance tank is full and should
be replaced.
The maintenance tank is not set in the
printer.
A paper cut error has occurred.
The ink remaining is not enough to finish
the cleaning.
Thick paper is loaded when cleaning is
executed.
No paper is loaded when printing a
pattern, such as a nozzle check pattern.
54