Hard Drive - HP Pavilion10 Maintenance And Service Manual

Reverse this procedure to install the speaker assembly.

Hard drive

Description
500-GB, 5400-rpm
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Top cover (see
b. Speaker assembly
To remove a hard drive:
1. Position the computer upside down on a flat surface.
Remove the 4 Phillips screws that secure the hard drive to the chassis (1).
2. Lift the hard drive (2) out of the hard drive bay.
42 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 27).
Top cover on page 29)
Spare part number
683802-005