Speaker Assembly - HP Pavilion10 Maintenance And Service Manual

Speaker assembly

Description
Speaker assembly
NOTE: You must remove the left speaker to remove to function board cable.
Before removing the speaker assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
Top cover (see
▲
Remove the speaker assembly:
1. Position the base enclosure with the speakers in front..
2. Disconnect the speaker cable from the system board (1).
3. Remove the 3 Phillips screws that secure the speakers to the base enclosure (2).
4. Remove the speaker cables from the clips built into the base enclosure (3).
5. Remove the speakers from the computer (4).
Battery on page 27).
Top cover on page 29)
Spare part number
741979-001
Component replacement procedures 41