Position The Brake Caliper And Mount And Tighten Screws 4 . Guideline; Screw, Front Brake Caliper M8 - KTM 125 SX EU Owner's Manual

11 SERVICE WORK ON THE CHASSIS
(All XC models)
–
Position the fork legs.
Bleeder screws
L00908-10
–
Tighten screws
Guideline
Screw, bottom triple clamp
L00945-10
–
Tighten screw
Guideline
Screw, top steering head
101676-10
–
Mount and tighten screw
Guideline
Screw, top steering stem
101677-10
–
Tighten screws
Guideline
Screw, top triple clamp
L00945-11
–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front brake caliper
–
Position the brake line and clamp. Mount and tighten screws
800220-10
face toward the front.
5
Info
The rebound damping is located in the right fork leg (red adjusting
screw). The compression damping is located in the left fork leg (white
adjusting screw).
Grooves are milled into the side of the upper end of the fork legs. The
second milled groove (from the top) must be flush with the top edge of
the upper triple clamp.
.
6
.
4
.
7
M8
.
8
M8
M8 12 Nm (8.9 lbf ft)
M20x1.5 12 Nm (8.9 lbf ft)
17 Nm Loctite
(12.5 lbf ft)
M8 17 Nm
(12.5 lbf ft)
.
9
25 Nm Loctite
(18.4 lbf ft)
.
bk
46
® 243™
® 243™