Removing The Fork Protector; Installing The Fork Protector; Removing The Lower Triple Clamp - KTM 125 SX EU Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.9

Removing the fork protector

11.10

Installing the fork protector

11.11

Removing the lower triple clamp

-
Position the brake caliper and mount and tighten screws
Guideline
Screw, front brake caliper
-
Position the brake line. Put the clamp on and mount and tighten screws
800191-11
Finishing work
-
Install the front wheel.
x
Preparatory work
-
Raise the motorcycle with the lift stand. (
-
Remove the front wheel.
-
Remove the fork legs.
Main work
-
Remove screws
-
Remove the screws on the right fork leg. Lift off the fork protector.
B00306-10
x
Main work
-
Position the fork protection on the left fork leg. Mount and tighten screws
Guideline
Remaining screws, chassis
-
Position the fork protection on the right fork leg. Mount and tighten the screws.
Guideline
Remaining screws, chassis
B00306-10
Finishing work
-
Install the fork legs.
-
Install the front wheel.
x
Preparatory work
-
Raise the motorcycle with the lift stand. (
-
Remove the front wheel.
-
Remove the fork legs.
-
Remove the start number plate. (
-
Remove the front fender. (
-
Remove the handlebar cushion.
M8
( p. 74)
x
x ( p. 74)
( p. 43)
x
on the left fork leg. Lift off the fork protector.
1
( p. 43)
x
x ( p. 74)
( p. 74)
x
( p. 43)
x
p. 48)
p. 48)
.
4
25 Nm Loctite
(18.4 lbf ft)
p. 41)
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
p. 41)
44
® 243™
.
5
.
1