16
TUNING THE ENGINE
16.1
Checking the play in the throttle cable
16.2
Adjusting the play in the throttle cable
–
Check the throttle grip for smooth operation.
–
Move the handlebar to the straight-ahead position. Move the throttle grip back-
wards and forwards to ascertain the play in the throttle cable.
Play in throttle cable
»
If the throttle cable play does not meet specifications:
–
Adjust the play in the throttle cable.
Danger
400192-10
Danger of poisoning Exhaust gases are toxic and inhaling them may result
in unconsciousness and/or death.
–
–
Start the engine and let it run idle. Move the handlebar to and fro over the entire
steering range.
The idle speed must not change.
»
If the idle speed changes:
–
Adjust the play in the throttle cable.
x
Preparatory work
–
Remove the seat. (
–
Remove the fuel tank.
–
Check the routing of the throttle cable. (
Main work
–
Move the handlebar to the straight-ahead position.
–
Push back sleeve
–
Ensure that the throttle cable sleeve is pushed all the way into barrel adjuster
–
Loosen nut
L00928-10
–
Turn adjusting screw
grip.
Guideline
Play in throttle cable
–
Tighten nut
–
Slide on sleeve
400192-11
Finishing work
–
Check the throttle grip for smooth operation.
–
Install the fuel tank.
–
Mount the seat. (
–
Check the play in the throttle cable. (
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
p. 50)
(
p. 55)
x
.
1
.
3
in such a way there is throttle cable play
2
.
3
.
1
(
p. 56)
x
p. 51)
2... 3 mm (0.08... 0.12 in)
(
p. 85)
x
x
(
p. 85)
p. 61)
A
2... 3 mm (0.08... 0.12 in)
p. 85)
85
.
2
in the throttle