Adjusting The Rebound Damping Of The Fork - KTM 125 SX EU Owner's Manual

10 TUNING THE CHASSIS
10.13

Adjusting the rebound damping of the fork

Info
The hydraulic rebound damping determines the fork suspension behavior.
(All XC models)
–
Turn the white adjusting screw
–
Turn back counterclockwise by the number of clicks corresponding to the fork
L00906-10
type.
Guideline
Compression damping (150 XC USA)
Comfort
Standard
Sport
Compression damping (250/300 XC)
Comfort
Standard
Sport
(All SX models)
–
Remove protection caps
–
Turn adjusting screws
–
Turn back counterclockwise by the number of clicks corresponding to the fork
type.
B00295-10
Guideline
Rebound damping (125 SX EU, 150 SX EU)
Comfort
Standard
Sport
Rebound damping (125 SX USA, 150 SX USA)
Comfort
Standard
Sport
Rebound damping (250 SX EU)
Comfort
Standard
Sport
Rebound damping (250 SX USA)
Comfort
Standard
Sport
1
Info
Adjusting screw is located at the upper end of the left fork leg.
1
The compression damping is located in the left fork leg (white adjusting
screw). The rebound damping is located in the right fork leg (red adjust-
ing screw).
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
.
1
clockwise all the way.
2
Info
Adjusting screws are located at the bottom end of the fork legs.
2
Make the same adjustment on both fork legs.
all the way clockwise.
15 clicks
13 clicks
11 clicks
15 clicks
13 clicks
11 clicks
14 clicks
12 clicks
10 clicks
14 clicks
12 clicks
10 clicks
14 clicks
12 clicks
10 clicks
14 clicks
12 clicks
10 clicks
38