17
SERVICE WORK ON THE ENGINE
17.1
Checking the gear oil level
Info
The gear oil level must be checked while the engine is cold.
17.2
Changing the gear oil
Preparatory work
–
Stand the motorcycle upright on a horizontal surface.
Main work
(All 125/150 models)
–
Remove screw
–
Check the gear oil level.
A small quantity of gear oil should flow out of the opening.
»
If gear oil does not flow out:
–
–
Mount and tighten the screw in the opening used to check the gear oil level.
101716-10
Guideline
Screw, gear oil level check
(All 250/300 models)
–
Remove screw
–
Check the gear oil level.
A small quantity of gear oil should flow out of the opening.
»
If gear oil does not flow out:
–
–
Mount and tighten the screw in the opening used to check the gear oil level.
Guideline
B00050-10
Screw, gear oil level check
x
–
Drain the gear oil.
400721-01
–
Refill with gear oil.
400722-01
from the opening used to check the gear oil level.
1
Add gear oil.
(
p. 93)
x
from the opening used to check the gear oil level.
1
Add gear oil.
(
p. 93)
x
(
p. 92)
x
(
p. 92)
x
M6
10 Nm
(7.4 lbf ft)
M6
10 Nm
(7.4 lbf ft)
91