11
SERVICE WORK ON THE CHASSIS
11.44
Checking the rubber grip
(250 SX EU, 250 SX USA)
–
Check the routing of the throttle cable.
The throttle cable must be routed along the back of the handlebar, to the
right of the frame, below the fuel tank bracket, and to the carburetor.
»
If the throttle cable is not routed as specified:
–
101696-01
(250/300 XC)
–
Check the routing of the throttle cable.
The throttle cable must be routed along the back of the handlebar, to the
right of the frame, below the fuel tank bracket, and to the carburetor.
»
If the throttle cable is not routed as specified:
–
101697-01
Finishing work
–
Install the fuel tank.
–
Mount the seat. (
–
Check the rubber grips on the handlebar for damage and wear and to ensure they
are firmly seated.
»
If a rubber grip is damaged, worn, or loose:
–
Change and secure the rubber grip.
Rubber grip adhesive (00062030051) (
401197-01
Correct the routing of the throttle cable.
Correct the routing of the throttle cable.
x
(
p. 56)
p. 51)
p. 128)
62