Changing The High Beam Bulb - KTM 1190 Adventure Owner's Manual

16 ELECTRICAL SYSTEM
16.10

Changing the high beam bulb

Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
–
Install the wind shield. (
–
Install the mask spoiler.
–
Install the tank cover. (
–
Install the front side cover. (
–
Mount the driver's seat. (
–
Mount the passenger seat. (
–
Check the headlight setting. (
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the passenger seat. (
–
Remove the driver's seat. (
–
Remove the front side cover. (
–
Remove the tank cover. (
–
Remove the mask spoiler.
–
Remove the wind shield. (
–
Remove the headlight mask with the headlight. (
p. 129)
( p. 122)
p. 127)
p. 118)
p. 105)
p. 104)
p. 175)
p. 103)
p. 104)
p. 117)
p. 125)
( p. 119)
p. 128)
p. 168)
172