E-Mail Tx (Smtp) - Oce cm4521 User Manual

4
4.9

E-Mail TX (SMTP)

Information, such as the SMTP server, that is required to send data as an e-
mail attachment in Scan mode can be specified. In addition, authentication
settings can be specified for e-mail transmission. Settings can be specified
for the following.
E-Mail TX (SMTP) screen 1/5
Parameter
Scanning
Status Notification
Total Counter Notification
E-Mail TX (SMTP) screen 2/5
Parameter
SMTP Server Address
E-Mail TX (SMTP) screen 3/5
Parameter
Binary Division
Divided Mail Size
E-Mail TX (SMTP) screen 4/5
Parameter
Connection Timeout
Server Capacity
4-72
Description
Select whether or not Scan to E-Mail operations are used.
Select whether or not status notification is used.
Select whether or not total counter notification is used.
Description
Specify the address of the SMTP server used to send e-mail mes-
sages. For details, refer to "SMTP Server Address" on page 4-77.
Description
Specify whether or not a large e-mail message is divided and sent
in small sections. This is used to send data that has exceeded the
maximum capacity when the maximum capacity is limited per e-
mail message on the e-mail server.
Specify the size of divided data when dividing the data to be sent.
To change the setting, press the [C] (clear) key, and then use the
keypad to type in the desired setting. (Range: 100 to 15000 KB)
Description
If transmission stops while an e-mail message is being sent to the
SMTP server, the e-mail transmission operation is automatically
aborted after a specified length of time has passed. Specify the
length of time from the point when the transmission stops to the
point when the transmission operation is to be aborted. To change
the setting, touch [+] or [−] to specify the setting (in 30-second in-
crements). (Range: 30 to 300 seconds)
Specify the maximum capacity that the SMTP server can receive
per e-mail message. To change the setting, press the [C] (clear)
key, and then use the keypad to type in the desired setting. (Range:
1 to 100 Mbyte) To apply no limit, touch [No Limit].
Network Settings
cm4521