3
–
To enter an IP address, touch [IPv4 Address Input] or [IPv6 Address
Input], and then type in the address, using the keypad or the
number buttons that appear. Touch [←] or [→] to move the cursor
to the desired position, and then type in the numbers.
–
When the input format is switched to entering an IP address after
the host name was entered, the host name is cleared.
–
If [Host Name Input] is touched after the IP address was entered,
the entered IP address is saved and the input screen appears.
–
When [Host Name Input] is touched, check that the DNS setting is
correctly specified. For details on the DNS settings, refer to "TCP/
IP Settings" on page 4-17.
10
Touch [OK].
11
Touch [File Path], and then type in the file path, using the keyboard that
appears.
12
Touch [OK].
13
Touch [↑] or [↓].
New screen 2/2 appears.
14
Touch [User ID], and then type in the user ID, using the keyboard that
appears.
–
To cancel registration of the user ID, touch [ON] beside "anony-
mous".
15
Touch [OK].
16
Touch [Password], and then type in the password, using the keyboard
that appears.
17
Touch [OK].
3-22
Specifying Utility mode parameters
cm4521