Operation Display - Sanyo DSR-3716 Instruction Manual

Preparing for use

Operation display

The operation display shows information necessary for operation,
such as the date, time and video quality. The operation display can
be hidden.
1 2 3
01-01-06 00:00:00 REC REPEAT EN A ALARM 0000
1
Date display
01-01-06 (month, day, year): Do not forget to set the date
using the menu settings when turning the power on for the first
time.
2
Time display
00:00:00: Do not forget to set the time using the menu settings
when turning the power on for the first time.
3
Operation symbols
The operation symbols are displayed during recording and
control operations.
REC: Recording
EXT: External timer recording
: Reverse playback
: Still
: Playback (including simultaneous recording and playback)
4
Remaining recording area (P46)
It is displayed only during normal and alarm recording.
1% ~ 100%:
If overwrite is not permitted on the hard disk, it displays the
remaining area as a percentage.
REPEAT:
Repeatedly overwrites the video on the hard disk.
5
Image quality display
The image quality display indicates the quality of the video
recorded on the hard disk.
BA (Basic): Rough image quality, approx. 15kB
NO (Normal): Standard image quality, approx. 22kB
EN (Enhanced): Enhanced image quality, approx. 30kB
FI (Fine): Fine image quality, approx. 42kB
SF (Super Fine): Super fine image quality, approx. 50kB
4 5 6 7 8
0
02
F9
: Fast-forward playback
: Fast-reverse playback
: Slow playback
: Reverse slow playback
Changing the position of the operation display
Whenever the EXIT/OSD button is pressed, the position of
the operation display changes.
EXIT/OSD
02
6
Audio recording indicator
(P49: 2 AUDIO RECORDING)
Displayed when audio recording is performed.
7
Recording type
• ALARM: Alarm playback or setting is in progress
• ALARM (Blinking): Alarm recording is in progress
• PRE: Pre-alarm playback or setting is in progress
• ARCHIV: Archive playback is in progress
8
Alarm total
The alarm total indicates the total number of alarms.
9
Camera title
• 01~16 (or 01~09):
First it displays the camera number. The camera number
can be replaced with a name such as the camera's location.
• VIDEO LOSS:
The display alternates between this message and the
camera number when the camera video is lost.
The operating display of the monitor is not displayed and
blinks in the same position.
• NO VIDEO:
It is displayed in place of the camera number if there is no
video signal connected to the video input terminal.
F
Alarm type
• EA: The display alternates between this message and the
camera title when an external alarm signal is detected.
• SA: The display alternates between this message and the
camera title when a motion sensor alarm signal is
detected.
• ES: The display alternates between this message and the
camera title when an external alarm signal and a
motion sensor signal are detected.
(Hidden)
02
How to use 14