Camera Control From The Dvr - Sanyo DSR-3716 Instruction Manual

General settings
G-2

Camera control from the DVR

4 5 6
A
MENU ENTER
PRESET AUTO PAN
SEQUENCE TOUR
1 2 3
A
Press the FUNC. button.
While the FUNC. indicator is ON, the dome cameras can be operated by using the control buttons listed under
1
Preset button (PRESET)
When the PRESET button is pressed followed by the camera
selection button, the lens moves to the preset position, and the
preset call is cancelled.
Pressing the PRESET button for approximately 3 seconds will
activate the registration status. Pressing on the camera
selection button allows you to register it.
2
Sequence button (SEQUENCE)
The cameras will start automatic sequence operation. If
another button is pressed, the automatic sequence operation
will be cancelled.
3
Tour button (TOUR)
Performs tour operation.
If another button is pressed, the tour operation will be
cancelled.
4
Automatic panning button (AUTO PAN)
Performs automatic panning. If another button is pressed,
panning will stop.
5
Menu button (MENU)
Displays the camera's internal menu on the monitor.
6
Confirmation button (ENTER)
This button is used to confirm the contents of the menu screen.
7
Autofocus button (AF)
Use this button to adjust the focus with one touch.
8
Iris button (IRIS)
Use this button to switch to iris adjustment mode; the IRIS
indicator will start blinking.
Press the "ZOOM/I/FOo" button to close the iris, and press the
"ZOOM/I/FOp" button to open the iris.
Press the IRIS button once again to exit the iris adjustment
mode.
73 How to set
7 8 G
AF
IRIS
FOCUS
PAN
ZOOM/I/FO
9 F H
b Camera control is not possible in the following
cases, even if the function indicator (FUNC.) is ON.
• While displaying menus, or the search menu
• During playback (during pause, or copy menu is display)
• During quad-screen, multi-screen (9/16) and plus screen
display
• During zooming, automatic scrolling and monitor 2 display
b If another button is pressed while the following
indicators are blinking (controllable state), the
control function will be automatically cancelled.
• PRESET, IRIS, FOCUS indicators
9
Focus button (FOCUS)
Use this button to switch to focus adjustment mode; the
FOCUS indicator will start blinking.
Press the "ZOOM/I/FOo" button to set the focus on nearby
objects, and press the "ZOOM/I/FOp" button to set the focus
on far-off objects.
Press the FOCUS button once again to exit the focus
adjustment mode.
F
Zoom/Iris/Focus button (ZOOM/I/FO)
Press the "o" button to shrink the screen, and press the "p"
button to enlarge it.
G
Pan dial (PAN)
Performs panning.
Turn the PAN dial clockwise to move the lens to the right, and
turn it counterclockwise to move the lens to the left.
Larger turning angle results in faster movement; and smaller
turning angle results in slower movement.
H
Tilt dial (TILT)
Performs tilting.
Turn the TILT dial clockwise to tilt the lens down, and turn it
counterclockwise to tilt the lens up.
1 H
~ .