Maintenance And Troubleshooting - Healthrider Crosstrainer 2000s Elliptical User Manual

MAINTENANCE AND TROUBLESHOOTING

Inspect and properly tighten all parts of the elliptical
exerciser regularly. Replace any worn parts immedi-
ately.
For smooth
operation of the
elliptical exer-
ciser, inspect
and clean the
incline ramp
regularly using
a soft cloth and
mild detergent.
Other parts of
the elliptical
exerciser can
also be cleaned in this way. Keep liquids off the
console. Never use abrasives or solvents.
PULSE SENSOR TROUBLESHOOTING
If the chest pulse sensor does not function properly,
see CHEST PULSE SENSOR TROUBLESHOOTING
on pages 9 and 10. If the handgrip pulse sensor does
not function properly, see step 5 on page 14.
HOW TO CALIBRATE THE INCLINE RAMP
If the elliptical exerciser's incline ramp does not func-
tion properly, activate the calibration process by fol-
lowing the steps below.
1. Hold down the Resistance 1 button and the
Program Select button simultaneously for about
five seconds. Note: If numbers appear in the main
display, disregard the numbers.
2. Press the Program Select button again. Note: A
combination of letters and numbers may appear in
the main display.
3. Press the 10° or 30° Ramp button. The ramp will
move all of the way up and then all of the way
down.
4. Press the Program Select button three times. The
console will then be in the normal operating mode
and the elliptical exerciser will be ready for use.
HOW TO MOVE THE ELLIPTICAL EXERCISER
Stand in front of the elliptical exerciser, hold the han-
dlebars firmly, and place one foot against the ramp in
the location shown below. Pull the handlebars until
the elliptical exerciser can be moved on the front
Wheels
wheels, and carefully move the elliptical exerciser to
the desired location. Then, place one foot against the
ramp, and lower the elliptical exerciser. Due to the
size and weight of the elliptical exerciser, use
Incline
extreme caution whilst moving and lowering it.
Ramp
HOW TO LEVEL THE ELLIPTICAL EXERCISER
If the elliptical
exerciser rocks
during use, turn
one or both of
the leveling feet
under the rear
stabiliser until
the rocking
motion is elimi-
nated.
26
Handlebars
Place your
foot here
Wheel
Leveling
Foot