How To Move Product Data With An Ethernet Cable - Fluke 985 User Manual

How to Move Product Data with an Ethernet
Cable
To move Product data to a PC with an Ethernet cable,
you can connect the Ethernet cable to the PC or directly
to an Ethernet connection source.
If you connect directly to the PC Ethernet port, you must
be able to connect to the network, for example, with a
wireless connection. With this setup, the Product IP
address and subnet will need to be set manually.
1. The Charge Base must be used for Ethernet
connectivity. Connect the Ethernet cable to the
Charge Base Ethernet port and to the Ethernet
source. The Product must be on the base. See the
"Charge Base Connections" section.
When the Ethernet cable is connected, you will see
the Ethernet connection icon on the lower display
( ).
2. With a web browser, go to the internet address
HPC[Product Serial Number]. After "HPC" add your
Product serial number without brackets. A website
where you can download the Data.tsv file to your PC
opens.
3. Double click on the filename to download or open the
file.
To see the data:
1. If the file was downloaded, use Windows Explorer to
go to the directory where the file was downloaded. If
you choose to open the file from the web browser, go
to step 2.
2. Double-click the file open it. The file can be opened
with a text editor or Microsoft Excel. A sample report,
seen in Excel, is shown in Figure 5.
Airborne Particle Counter
Data Export
19