Login Submenu - Fluke 985 User Manual

985
Users Manual
The submenu also shows dynamic data that you can see
as a sample is taken:
Present Battery Voltage
Calibration: OFF or a voltage during a live sample
Laser Current: OFF or mA during a live sample
Motor Current
Pump Hours (cumulative)
Laser Hours (cumulative)
Calibration Date
Calibration Due Date
At the bottom of the screen, there are these
abbreviations, with versions listed:
FW = firmware
BL = Bootloader
FP = FPGA code
HW = hardware
BD = Board Dash number
To exit the submenu, push .
16

Login Submenu

As stated prior, you can lock the General Setup submenu
so that the parameter settings cannot be changed.
If the General Setup submenu is locked:
1. Push  or  to highlight
2. Push  to access the login screen.
3. Enter the password.
The general setup items can now be changed. You can
disable password security in the General Setup submenu,
but until you disable it, you are still in security mode and it
will be necessary for you to enter the password each time
you want to go to the General Setup submenu.
.