Introduction
The Fluke 381 Remote Display True-rms Clamp Meter (the Product or Meter) is a handheld,
battery-operated Clamp Meter (the Meter) that has a remote-display module and detachable
iFlex (Flexible Current Probe). The Remote Display can be removed from the Meter body and
read away from the measurement source. This lets the display be easily read in difficult-
measurement situations such as a hazardous environments, or very tight spaces. The Flexible
Current Probe makes it possible to measure higher current (up to 2500 A ac) and larger cables
that traditional jawed meters cannot measure.
Contact Fluke
Fluke Corporation operates worldwide. For local contact information, go to our website:
www.fluke.com.
To register your product, or to view, print, or download the latest manual or manual
supplement, go to our website.
+1-425-446-5500
Safety Information
General Safety Information is in the printed Safety Information document that ships with the
Product and at www.fluke.com. More specific safety information is listed where applicable.
A Warning identifies hazardous conditions and procedures that are dangerous to the user. A
Caution identifies conditions and procedures that can cause damage to the Product or the
equipment under test.
Radio Frequency Data
Changes or modifications to the wireless 2.4 GHz radio not expressly approved by
Fluke Corporation could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the two conditions
that follow:
1. This device cannot cause interference.
2. This device must accept any interference, including interference that can cause undesired
operation of the device.
fluke-info@fluke.com
Note
1