Communication Setup Submenus
The Communication Setup Menu includes two submenus.
Submenu icons are shown in Table 10 and the
subsequent sections tell you about these submenus.
Table 10. Communication Submenu Icons
Icon
General Setup
Diagnostics
Login
Communication Setup
Check DHCP for automatic LAN configuration or uncheck
it to set an IP address, Subnet, and Gateway manually.
Submenu Item
General Setup Submenu
Product hardware setup can be changed with the General
Setup submenu. These parameters can be changed:
Backlight Timeout in seconds: 000 to 999 seconds
Backlight Contrast: High, Medium, or Low
Security: You can add a password for the Product.
The default password is "123456". If password is
changed and lost, contact Fluke Customer Service to
reset it. See the "How to Contact Fluke" section.
Feedback Volume: Mute, Low, Medium, High
The Current System Date: MDY, YMD, DMY formats
The Current System Time: 12 hour or 24 hour
To exit the submenu, push .
Diagnostics Submenu
The Diagnostics Submenu shows you static product
information:
Model Number
Serial Number
Airborne Particle Counter
Operation
15