To Inspect The Cdi Magneto; Cdi Unit Inspection - Yamaha YZ125(N)/LC Owner's Service Manual

IGNITION SYSTEM
EC627011
CDI MAGNETO INSPECTION
1. Inspect:
9Pick-up coil resistance
Out of specification
Tester (+) lead White/ Red lead 1
Tester (–) lead White/ Blue lead 2
Pick–up coil
resistance
248~372½ at
20°C (68°F)
2. Inspect:
9Source coil 1 resistance
Out of specification
Tester (+) lead Black/ Red lead 1
Tester (–) lead Green/White lead 2
Source coil 1
resistance
720~1,080½ at
20°C (68°F)
3. Inspect:
9Source coil 2 resistance
Out of specification
Tester (+) lead Green/ Blue lead 1
Tester (–) lead Black lead 2
Source coil 2
resistance
44~66½ at
20°C (68°F)
EC628000

CDI UNIT INSPECTION

Check all electrical components. If no fault is
found, replace the CDI unit. Then check the
electrical components again.
6-5
ELEC
Replace.
Tester selector
position
½ ´ 100
Replace.
Tester selector
position
½ ´ 100
Replace.
Tester selector
position
½ ´ 10