Clutch Lever; Shift Pedal - Yamaha TENERE XT660Z Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
r
Hazard switch " "
With the key in the "ON" or F position,
use this switch to turn on the hazard
1
lights (simultaneous flashing of all turn
signal lights).
2
The hazard lights are used in case of
an emergency or to warn other drivers
when your vehicle is stopped where it
3
might be a traffic hazard.
4
NOTICE
5
Do not use the hazard lights for an
extended length of time with the
engine not running, otherwise the
6
battery may discharge.
7
8
9
10
EAU12733

Clutch lever

ECA10061
1. Clutch lever
The clutch lever is located at the left
handlebar grip. To disengage the
clutch, pull the lever toward the han-
dlebar grip. To engage the clutch, re-
lease the lever. The lever should be
pulled rapidly and released slowly for
smooth clutch operation.
The clutch lever is equipped with a
clutch switch, which is part of the igni-
tion circuit cut-off system. (See page
4-17).
EAU12820

Shift pedal

1
1. Shift pedal
The shift pedal is located on the left
side of the engine and is used in com-
bination with the clutch lever when
shifting the gears of the 5-speed con-
stant-mesh transmission equipped on
this motorcycle.
4-10
EAU12870