Yamaha TENERE XT660Z Owner's Manual page 34

INSTRUMENT AND CONTROL FUNCTIONS
With the engine turned off:
1. Move the sidestand down.
2. Make sure that the engine stop switch is set to
1
3. Turn the key on.
4. Shift the transmission into the neutral position.
5. Push the start switch.
2
Does the engine start?
3
4
With the engine still running:
6. Move the sidestand up.
7. Keep the clutch lever pulled.
5
8. Shift the transmission into gear.
9. Move the sidestand down.
Does the engine stall?
6
7
After the engine has stalled:
8
10. Move the sidestand up.
11. Keep the clutch lever pulled.
12. Push the start switch.
9
Does the engine start?
10
The system is OK. The motorcycle can be ridden.
"I"
YES NO
YES NO
YES NO
WARNING
If a malfunction is noted, have a Yamaha dealer
check the system before riding.
.
The neutral switch may not be working correctly.
The motorcycle should not be ridden until checked by a
Yamaha dealer.
The sidestand switch may not be working correctly.
The motorcycle should not be ridden until checked by a
Yamaha dealer.
The clutch switch may not be working correctly.
The motorcycle should not be ridden until checked by a
Yamaha dealer.
4-18
0