Download Print this page

YAMAHA TENERE XT660Z Owner's Manual: Replacing The License Plate Light Bulb; Replacing An Auxiliary Light Bulb

Hide thumbs

Advertisement

4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise
the lens may break.
PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing the license plate
light bulb
1. Bulb socket
2. License plate light bulb
1. Remove the socket (together with
the bulb) by pulling it out.
2. Remove the burnt-out bulb by
pulling it out.
3. Insert a new bulb into the socket.
4. Install the socket (together with
the bulb) by pushing it in.
7-35
EAUM2202
Replacing an auxiliary light
bulb
1. Auxiliary light socket
2. Auxiliary light bulb
This model is equipped with two auxil-
iary lights. If an auxiliary light bulb
burns out, replace it as follows.
1. Remove panel G. (See page 7-7.)
2. Remove the auxiliary light socket (to-
gether with the bulb) by pulling it out.
3. Remove the burnt-out bulb by
pulling it out.
4. Insert a new bulb into the socket.
5. Install the auxiliary light socket
(together with the bulb) by push-
ing it in.
6. Install the panel.
EAU42652
1
2
3
4
5
6
7
8
9
10

Advertisement

Troubleshooting

This manual also for:

Tenere xt660za

Comments to this Manuals

Symbols: 0
Latest comments: