Yamaha YZ125(W)/W1 Owner's Service Manual page 406

FRONT BRAKE AND REAR BRAKE
4. Install:
9 Pin 1
9 Plain washer 2
9 Cotter pin 3
NOTE:
After installing, check the brake pedal height.
Refer to "REAR BRAKE ADJUSTMENT" section
in the CHAPTER 3.
EC5A5911
Front brake hose
1. Install:
9 Copper washer 1
9 Brake hose 2
9 Union bolt 3
w
Always use new copper washers.
cC
Install the brake hose so that its pipe por-
tion a a directs as shown and lightly touch-
es the projection b b on the caliper.
2. Install:
9 Brake hose holder 1
9 Bolt (brake hose holder) 2
3. Install:
9 Brake hose holder 1
9 Nut (brake hose holder) 2
NOTE:
Align the top a of the brake hose holder with the
paint b of the brake hose.
5-22
CHAS
30 Nm (3.0 m•kg, 22 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)
7 Nm (0.7 m•kg, 5.1 ft•lb)