Chapter 6: Vpn; Viewing Ipsec Vpn Status - Cisco Small Business RV315W Administration Manual

VPN

Viewing IPsec VPN Status

STEP 1
Cisco RV315W Broadband Wireless VPN Router Administration Guide
The RV315W supports the IPsec Virtual Private Network (VPN) feature to set up a
single gateway-to-gateway VPN tunnel or a client-to-gateway VPN tunnel. In this
configuration, the RV315W creates a secure VPN connection to another VPN-
enabled router or a remote PC that installs third-party VPN client software. For
example, you can configure the RV315W at a branch site to connect to the VPN
router at the corporate site so that the branch site can securely access the
corporate network.
This chapter describes how to configure IPsec VPN that allows remote workers to
access your network resources. Refer to the following sections:
• Viewing IPsec VPN Status
• Configuring IPsec VPN Policies
Use the IPsec VPN page to view the status of all IPsec VPN connections.
To view information for an IPsec VPN connection:
Click VPN > IPsec VPN. The IPsec VPN page opens.
The IPsec VPN Connections area displays the following information for all
existing IPsec VPN policies specified on the RV315W:
• Policy Name: Name of the IPsec VPN policy.
• Status: Shows whether the IPsec VPN policy is enabled or disabled.
• Interface: Interface used for the IPsec VPN policy.
• Connection Type: VPN connection type, such as Site-to-Site or PC-to-Site.
- Site-to-Site VPN: A secure VPN tunnel between the RV315W and a
remote VPN router.
6
68