Cisco Small Business RV315W Administration Manual page 10

Getting Started
Product Overview
Cisco RV315W Broadband Wireless VPN Router Administration Guide
WAN1 If the WAN1/LAN0 port on the back panel is set to a secondary
WAN interface (WAN1):
•
•
•
LAN0 If the WAN1/LAN0 port on the back panel is set to an additional
LAN interface (LAN0):
•
•
•
LAN1-8 The numbered lights correspond to the LAN ports on the back
panel of the RV315W.
•
•
•
USB •
•
•
3G •
•
•
Solid green when the RV315W is connected to the Internet
through the WAN1 port, but there is no traffic over this port.
Flashes green when the RV315W is sending or receiving
data over the WAN1 port.
Off when the WAN1 port has no connection.
Solid green when the RV315W is connected to a device
through the LAN0 port, but there is no traffic over this port.
Flashes green when the RV315W is sending or receiving
data over the LAN0 port.
Off when the LAN0 port has no connection.
Solid green when the RV315W is connected to a device
through the corresponding port (LAN1 to 8), but there is no
traffic over that port.
Flashes green when the RV315W is sending or receiving
data over the corresponding LAN port.
Off when the corresponding LAN port has no connection.
Solid green when a USB device is detected, but has no read
and write operations.
Flashes green when a USB device is detected and has read
and write operations.
Off when the RV315W does not detect a USB device.
Solid green when the RV315W is connected to a 3G
wireless network, but there is no traffic over the 3G USB
port.
Flashes green when the RV315W is sending or receiving
data over the 3G USB port.
Off when the RV315W does not connect to a 3G wireless
network.
1
7