Completing The Setup Wizard - Cisco Small Business RV315W Administration Manual

Using the Setup Wizard

Completing the Setup Wizard

STEP 11
Completing the Setup Wizard
STEP 12
Cisco RV315W Broadband Wireless VPN Router Administration Guide
Security Mode
WPA2-Enterprise
If you want to continue, click Next to proceed to the Complete Setup Wizard page.
If you want to return to the previous page, click Back. If you want to exit the Setup
Wizard, click Exit.
From the Complete Setup Wizard page you can see the summary information for
all configurations.
If you want to return to the previous page, click Back. If you want to exit the Setup
Wizard, click Exit.
Configuration
WPA2-Enterprise uses WPA2 with RADIUS authentication.
This mode always uses AES encryption mechanism for
data encryption and requires the use of a RADIUS server
to authenticate users.
If you choose this option, enter the following information:
• WPA Key Renewal Timeout: Enter a value to set
the interval at which the key is refreshed for clients
associated to this SSID. A value of zero (0) indicates
that the key is not refreshed. The default value is
3600 seconds.
• WPA Encryption: Choose AES or TKIP+AES as the
encryption algorithm for data encryption. The
default is AES.
• RADIUS Server IP Address: Enter the IP address
of the RADIUS server.
• RADIUS Server Port: Enter the port number of the
primary RADIUS server. The default value is 1812.
• RADIUS Server Key: Enter the key for
authentication used by the RADIUS server and the
RV315W.
• Show Password: Check to show the key for
authentication in plaintext.
2
28