Configuring Vlan Settings - Cisco Small Business RV315W Administration Manual

Port Management
Configuring LAN
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco RV315W Broadband Wireless VPN Router Administration Guide
• Manually Add Hosts: Specify the following information to reserve an IP
address for a host and then click Add:
- Hostname: Enter the name of the host for identification.
- IP Address: Enter the IP address that you want to reserve for the host.
- Host MAC Address: Enter the MAC address of the host.
Click Save to save your settings.
In the DHCP Service List area, the DHCP service status and its DHCP pool
settings for each VLAN are displayed. To delete a DHCP server, check the VLAN
and click Delete. Default VLAN 1 cannot be deleted.

Configuring VLAN Settings

Use the VLAN Settings page to create new VLANs and assign physical LAN ports
and/or wireless interfaces to the specified VLANs.
To create a new VLAN:
Click Port Settings > LAN > VLAN Settings. The VLAN Settings page opens.
To create a new VLAN, select the Add radio button and enter a unique
identification number for the VLAN in the VLAN ID field (VLAN1 and VLAN2 are
reserved by default).
Assign the physical LAN interfaces or wireless interfaces to the VLAN by moving
them from the list of Available Ports to the list of Selected Ports. Traffic through
the selected interfaces is mapped to the VLAN.
Click Save to save your settings.
To delete a VLAN, select the Delete radio button and choose the VLAN ID from the
Choose VLAN drop-down men, and then click Save. The reserved VLAN1 and
VLAN2 cannot be deleted.
4
45