Managing System Configuration - Cisco Small Business RV315W Administration Manual

System Management

Managing System Configuration

!
CAUTION
STEP 1
STEP 2
STEP 3
Managing System Configuration
STEP 1
STEP 2
STEP 3
Cisco RV315W Broadband Wireless VPN Router Administration Guide
The Reset To Factory Defaults operation will wipe out the current settings used on
the RV315W. We recommend that you back up your current settings before
restoring the RV315W to the factory default settings.
To restore the RV315W to the factory default settings through the utility:
Click System Management > Reset To Factory Defaults. The Reset To Factory
Defaults page opens.
Click Reset to Factory Defaults.
Click OK. This operation reboots the unit and restores the RV315W to the factory
default settings. The settings that you have previously made to the RV315W are
lost.
This section describes how to work with the configuration. You can perform the
following tasks to maintain system configuration:
• Back up the settings currently used on your RV315W.
• Restore your settings from a saved configuration file.
• Upload the configuration to an upper-level Network Management System
(NMS).
To manage system configuration:
Click System Management > Configuration Management. The Configuration
Management page opens.
To back up the settings currently used on your RV315W, click Backup
Configuration. Select where to locate the configuration file, and then click Save.
To restore your setting from a saved configuration file, click Browse to locate and
select a saved configuration file, and then click Import. The system will reboot
with the loaded configuration file.
9
92