Seat Positioning Strap Installation; Computer Installation - Invacare Excelerator Owner's Operator And Maintenance Manual

OPTIONS
COMPUTER INSTALLATION (FIGURE 4)
1. Install metal plug onto spoke of front wheel approximately 2-inches from wheel rim.
2. Align metal plug with fork assembly.
3. Secure sensor to fork using hardware provided.
NOTE: Slot in sensor MUST align with metal plug for mileage, etc. to be registered on the
computer.
4. Remove one (1) of the chain guard screws and attach the computer mounting
bracket.
5. Snap computer into mounting bracket.
Mounting Bracket
Front Wheel
Spoke
Metal Plug
FIGURE 4 - COMPUTER INSTALLATION

SEAT POSITIONING STRAP INSTALLATION

(FIGURE 5)
1. Secure seat positioning strap to back canes using hardware provided.
FIGURE 5 - SEAT POSITIONING STRAP INSTALLATION
Part No. 1056188
Computer
Back Canes
Seat
Positioning
Strap
39
SECTION 8
Sensor
Excelerator™Series