Rear Safety Light; Tow Bar Installation And Use - Invacare Excelerator Owner's Operator And Maintenance Manual

SECTION 8
TOW BAR INSTALLATION AND USE (FIGURE 2)
NOTE: The tow bar will not work with wheelchairs with swingaway front riggings. Only rigid
wheelchairs with tubular style footrest can be towed using the tow bar.
1. Remove the two (2) set screws on each tow bar mounting bracket.
2. Attach the tow bar to the rear frame of the handcycle.
NOTE: Make sure that the tow bar is centered on the rear handcycle frame.
3. Secure the tow bar to the handcycle with the mounting brackets and set screws.
4. Secure the wheelchair to the tow bar with the fastening strips provided.
Fastening
Strip
Set Screws
FIGURE 2 - TOW BAR INSTALLATION
REAR SAFETY LIGHT (FIGURE 3)
WARNING WARNING
WARNING WARNING WARNING
Operation of the handcycle is subject
to all traffic rules and regulations.
(This may include the use of a safety
light and reflectors for dusk/night
riding.)
BATTERIES
1. Remove the lens cover.
2. Insert the AAA batteries with correct
polarity (+ or -).
3. Reinstall lens cover.
MOUNTING THE SAFETY LIGHT
1. Open clip on back of safety light.
2. Place clip over back upholstery fastening flap and release.
OPERATING THE SAFETY LIGHT
1. Press GREY button for ON/OFF.
2. Remove lens cover and slide switch back and forth for pulse or constant mode.
Excelerator™Series
Tow Bar
Mounting Bracket
Rear Handcycle
Frame
Safety Light
Lens Cover
Upholstery Fastening
Flap
FIGURE 3 - REAR SAFETY LIGHT
38
OPTIONS
Clip
Part No. 1056188