Invacare Excelerator Owner's Operator And Maintenance Manual page 24

SECTION 5
ADJUSTING FOOTREST ANGLE
1. Loosen the button screws and locknuts that secure the half clamps to the footrest weldment.
NOTE: The footplate clamps are located under the footplates.
2. Position footplates to an appropriate angle for user.
3. Securely tighten the button screws and locknuts that secure the half clamps to the footrest
weldment.
ADJUSTING FOOTREST DEPTH
1. Remove the two (2) button screws and locknuts that secure the footplates to the half clamps.
2. Adjust the footplates to one (1) of five (5) depths.
3. Line up the mounting holes in the footplates with the mounting holes in the footplate clamps.
4. Install the button screws into the mounting holes and tighten securely with the locknuts.
REPLACING INDIVIDUAL FOOTPLATES
1. Remove the two (2) button screws and locknuts that secure the footrests to the footplate
clamps.
2. Align new footplates on the footplate clamps at the desired depth.
3. Line up the mounting holes in the footplates with the mounting holes in the footplate clamps.
4. Install the button screws into the mounting holes and tighten securely with the locknuts.
DEPTH ADJUSTMENT
Footplate
ANGLE ADJUSTMENT OR REPLACEMENT
FIGURE 2 - FOOTREST ADJUSTMENT/REPLACEMENT
Excelerator™Series
Button Screws
Locknuts
24
RIDING POSITION
HEIGHT ADJUSTMENT
Socket Screws
Footplate
Footplate
Button Screws
Locknuts
Part No. 1056188