5 WHEELCHAIR OPERATION
Removing
1.
Remove the socket heat screw, three washers, spacer and locknut
that secures the footboard to the footboard support.
2.
Remove the footboard from the footboard support.
Installing
WARNING
Pinch point may occur when rotating the
footboard assembly.
1.
Position the footboard onto the footboard support so that the
mounting holes in the wheelchair frame align with the desired
mounting holes in the footboard support.
2.
Using the socket heat screw, three washers, spacer and locknut
secure the footboard to the footboard support.
Invacare® TDX® SC, Invacare TDX Spree
Washer
Locknut
Spacer
FIGURE 17
66
Footboard Support
Washers
Socket Head Screw
Footboard
Assembly
Removing
Part No 1149267