Cmpj+ Joysticks - Invacare TDX SC User Manual

CMPJ+ Joysticks


For this procedure, refer to FIGURE 11.
Disconnecting
1. Pull the latch away from the joystick connector.
2. Disconnect the joystick connector from the remaining connectors
Connecting
Ensure the gaskets are installed in the top

connector cap and between network connectors.
1. Ensure the latch is pulled away from the network connector.
2. Connect the network connector to the other connectors.
3. Top and Bottom Connectors - Install connector caps onto the
network connector.
4. Push the latch in to secure the network connectors and caps.
5. If necessary secure excess cable using tie-wraps.
Part No 1149267
Top Connector
Cap
Network
Connectors
Controller
Cable
Bottom
Connector
Cap
FIGURE 11 Disconnecting/Connecting the Joysticks - CMPJ+
105
Invacare® TDX® SC, Invacare TDX Spree
7 SETUP/MAINTENANCE
Latch
Gasket
Gasket
Gasket
Joysticks