Disengaging/Engaging Motor Lock Levers - Invacare TDX SC User Manual

5 WHEELCHAIR OPERATION
5.7

Disengaging/Engaging Motor Lock Levers

WARNING
DO NOT engage or disengage motor locks until the power is in the OFF position.
CAUTION
Ensure both motor release levers are fully engaged before driving the wheelchair.
 For this procedure, refer to FIGURE 13.
Motor lock disengagement/engagement allows
free-wheeling or joystick controlled operation.
Free-wheeling allows an assistant to maneuver the
wheelchair without power.
Motor lock levers are located between the rear
caster assembly and drive wheel on both sides of
the wheelchair.
1. Perform one of the following as if viewing the motors from behind
the wheelchair (Detail "A"):
• Engage (DRIVE) - Push motor lock levers in, towards the
wheelchair to engage the motor.
• Disengage (PUSH) - Pull motor lock levers out, away from
wheelchair to disengage the motor.
Invacare® TDX® SC, Invacare TDX Spree
ENGAGE MOTOR
(Drive) -
Move Motor Lock
Lever DOWN
Rear
Caster
FIGURE 13 Disengaging/Engaging Motor Lock Levers
60
Motor Lock Lever
DISENGAGE MOTOR (Push) -
Move Motor Lock Lever UP
Part No 1149267
Drive Wheel
Outside of
Wheelchair