Yamaha YZ450F(V) Owner's Service Manual page 276

CARBURETOR
11. Install:
• Needle valve 1
• Float 2
• Float pin 3
NOTE:
• After installing the needle valve to the float,
install them to the carburetor.
• Check the float for smooth movement.
12. Install:
• Pilot screw 1
• Spring 2
• Washer 3
• O-ring 4
Note the following installation points:
• Turn in the pilot screw until it is lightly
seated.
• Turn out the pilot screw by the number of
turns recorded before removing.
Pilot screw (example):
2-1/8 turns out
13. Install:
• O-ring
• Leak jet 1
• Float chamber 2
• Bolt (float chamber) 3
• Cable holder (throttle stop screw cable)
4
• Hose holder (carburetor breather hose)
5
4 - 18
ENG