Master/Slave Built In Preprogrammed Function - ACME LPB-4P User Manual

(yes blackout) or (no blackout) mode. Press the ENTER button to
store. (or automatically return to the auto show without any change after one minute)
To go back to the last function without any change press the MENU button.
Led Display
Press the MENU button up to when the
ENTER button and the display will blink. Use DOWN and UP button to select the
(the display will be always on) or the
minute after exit main functions). Once the mode has been selected, Press the
ENTER button to store. (or automatically return to the auto show without any change
after one minute) To go back to the last function without any change press the MENU
button.
Display Inversion
Press the MENU button up to when the
ENTER button and the display will blink. Use DOWN and UP button to select the
(display inversion) or
been selected, Press the ENTER button to store. (or automatically return to the auto
show without any change after one minute) To go back to the last function without
any change press the MENU button.
Color Mode
Press the MENU button up to when the
ENTER button and the display will blink. Use DOWN and UP button to select the
(red) ... or (white) or
manual mode, you can press UP/DOWN button to set
brightness 0%~100%) or (green 0~255) or
selected, Press the ENTER button to store. (or automatically return to the auto show
without any change after one minute) To go back to the last function without any
change press the MENU button.
Self-Test
Press the MENU button up to when the
LPB-4P
is showing on the display. Pressing
(the display will be off one
is showing on the display. Pressing
(display normal) mode. Once the mode has
is showing on the display. Pressing
(manual) mode. When you select the
(red 0~255:
(blue 0~255). Once
is showing on the display. Pressing
ENTER button, the display will blink, and the fixture will run the built-in program to
self-test. To go back to the last function press the MENU button.
Fixture Hours
Press the MENU button up to when the
ENTER button and the display will show the number of working hours of the package.
To go back to the last function press the MENU button.
Software version
Press the MENU button up to when the
ENTER button and the display will show the version of software of the package. To
go back to the last function press the MENU button.
4. How To Control The Package
You can operate the package in four ways:
1. By master/slave built-in preprogram function
2. By easy controller (CA-8/CA-8F)
3. By LED Mood Commander (LED-RC8/LED-RC8 F)
4. By universal DMX controller
No need to turn the package off when you change the DMX address, as new DMX
address setting will be effected at once. Every time you turn the package on, it will
show type on the display. After that the package will be ready to receive DMX signal
or run the built in programs.

4.1 Master/Slave Built In Preprogrammed Function

This function only works when the blackout mode of the first package (master) is set
to on. By linking the packages in master/slave connection, the first package will
control the other packages to give an automatic, sound activated, synchronized light
show. It's input will have nothing plugged into it, the master-LED will always on and
the sound-LED will flash to the music.
8B
LPB-4P
is blinking on the display. Pressing
is blinking on the display. Pressing
9B