HP ProCurve 6120G/XG Manual page 513

Port Port number on switch.
Re-auth Period Period of time (in seconds) after which clients connected to the port need to be re-
authenticated.
Access Control Port's authentication mode:
Auto: Network access is allowed to any connected device that supports 802.1X
authentication and provides valid 802.1X credentials.
Authorized: Network access is allowed to any device connected to the port,
regardless of whether it meets 802.1X criteria.
Unauthorized: Network access is blocked to any device connected to the port,
regardless of whether the device meets 802.1X criteria.
Max reqs Number of authentication attempts that must time-out before authentication fails and
the authentication session ends.
Quiet Period Period of time (in seconds) during which the port does not try to acquire a supplicant.
TX Timeout Period of time (in seconds) that the port waits to retransmit the next EAPOL PDU
during an authentication session.
Supplicant Timeout Period of time (in seconds) that th e switch waits for a supplicant response to an EAP
request.
Server Timeout Period of time (in seconds) that the switch waits for a server response to an
authentication request.
Cntrl Dir Directions in which flow of incoming and outgoing traffic is blocked on 802.1X-aware
port that has not yet entered the authenticated state:
Both: Incoming and outgoing traffic is blocked on port until authentication occurs.
In: Only incoming traffic is blocked on port before authentication occurs. Outgoing
traffic with unknown destination addresses is flooded on the unauthenticated
802.1X-aware port.
Configuring Port-Based and User-Based Access Control (802.1X)
Displaying 802.1X Configuration, Statistics, and Counters
12-57