Web and MAC Authentication
Setup Procedure for Web/MAC Authentication
Syntax: [no] radius-server
Syntax: radius-server host < ip-address > key <server-specific key-string>
3-18
[host < ip-address >] [oobm]
Adds a server to the RADIUS configuration or (with no)
deletes a server from the configuration. You can config
ure up to three RADIUS server addresses. The switch uses
the first server it successfully accesses. (Refer to
"RADIUS Authentication, Authorization, and Account
ing" on page 5-1.)
For switches that have a separate out-of-band manage
ment port, the oobm parameter specifies that the RADIUS
traffic will go through the out-of-band management
(OOBM) port.
[key < global-key-string >]
Specifies the global encryption key the switch uses with
servers for which the switch does not have a server-
specific key assignment (below). This key is optional if
all RADIUS server addresses configured in the switch
include a server-specific encryption key. (Default: Null.)
[no] radius-server host < ip-address > key
Optional. Specifies an encryption key for use during
authentication (or accounting) sessions with the speci
fied server. This key must match the encryption key used
on the RADIUS server. Use this command only if the
specified server requires a different encryption key than
configured for the global encryption key, above.
The no form of the command removes the key configured
for a specific server.