Ecr Printer Motor Lock Detector; Remote Slip Printer Motor Lock Detector - TEC MA-1535-2 series Owner's Manual

10. ECR PRINTER MOTOR LOCK DETECTOR

10. ECR PRINTER MOTOR LOCK DETECTOR
(1) This detects the printer motor lock condition caused by some trouble.
(2) When such a condition is detected, the front display indicates "PRINTER" (Programmable).
(3) To regain the normal condition, turn the power of the ECR to OFF, remove the cause of the motor
lock, and then turn the power to ON again.
(4) Press the [C] key to resume printing.

11. REMOTE SLIP PRINTER MOTOR LOCK DETECTOR

(1) This detects the remote slip printer motor lock condition caused by some trouble.
(2) When such a condition is detected, the front display indicates "SP ERROR" (Programmable) and
none of the keys will be accepted.
(3) To regain the normal condition, turn the powers of the ECR and the remote slip printer to OFF,
remove the cause of the motor lock, and then turn the powers to ON again.
* If the cause cannot be found in the remote slip printer and only the ECR may be required to work
temporarily without the remote slip printer, remove the remote printer cable from the ECR, and turn
the power of the ECR to ON.
10. ECR PRINTER MOTOR LOCK DETECTOR
10- 1
EO1-11149