Table of Contents
Advertisement
4. PROGRAMMING OPERATIONS
4.23 Tare Table Setting (Submode 56)
In 4.7 PLU Table Programming (Submode 4), some of Scale-compulsory PLUs may be set with a
Tare Table Number. The actual Tare Weight is set to each Tare Table here.
CONDITION
OPERATION
56 [#/NS]
NOTE: In the lowest digit of the Tare Weight (gram), only the value "0" or "5" can be set.
Example) To set Tare Table No. 1 with Tare Weight 0.13 LB:
Key Operation: Control Lock: SET, Enter 56 and depress the [#/NS] key.
[1] [3] [AT/TL]
4.24 General Unit Weight Setting (Submode 57)
General Unit Weight can be set here so that the Unit Weight may be effective to scale items entered
through departments or PLUs without any individual Unit Weight designation.
CONDITION
OPERATION
57 [#/NS]
(Refer to General Unit Weight Code Table below.)
General Unit Weight Code Table
Code
LB unit
1
1 LB
2
2 LB
3
3 LB
4
4 LB
5
5 LB
6
6 LB
7
7 LB
8
8 LB
9
9 LB
10
1/2 LB
11
1/4 LB
Anytime outside a sale
Control Lock: SET
|Tare Table No.| [#/NS]
1 digit (1 to 9)
[1] [#/NS]
(Tare Table No. 1)
(Tare Weight)
[#/NS]
(To complete this submode.)
Anytime outside a sale
Control Lock: SET
|General Unit Weight Code| [AT/TL]
1 to 11
Kg unit
Example) To set General Unit Weight Code 2:
1 Kg
2 Kg
Key Operation:
3 Kg
Control Lock: SET,
4 Kg
Enter 57 and depress the [#/NS] key.
[2] [AT/TL]
5 Kg
6 Kg
7 Kg
8 Kg
9 Kg
100 g
---
Repeat for another table.
|Tare Weight| [AT/TL]
X to 999X (gram) or 0 to 999 (LB)
(Unit: 1/100 LB or gram
Example: Enter 13 for 0.13 LB.)
[#/NS]
4-32
EO1-11149
4.23 Tare Table Setting (Submode 56)
[#/NS]
35*
35*
[#/NS]
35*
35*
Advertisement
Chapters
Table of Contents
