3. READ (X) AND RESET (Z) REPORTS
3.3.9 Zone PLU Report
OPERATION
Control Lock: X
Zone start PLU No. [#/NS] Zone end PLU No. [#/NS] 13 [AT/TL]
NOTES: 1. When the entered zone start/end PLU No. does not exist, the ECR will find the next PLU No.
2. Printing will be cancelled by depressing the [C] key during report print .
When Department and PLU Sales Ratio on
Reports is NOT programmed in Print Item on
Reports Setting
When Department and PLU Sales Ratio on
Reports is programmed in Print Item on
Reports Setting
3-16
EO1-11149
3.3 Report Samples