Square Multiplication - TEC MA-1535-2 series Owner's Manual

9. REGISTERING PROCEDURE AND PRINT FORMAT
9.13

Square Multiplication

OPERATION
(1) Department
Open Department type
Quantity [X/TIME] Quantity [X/TIME] Price [Open DEPT]
Quantity [X/TIME] Quantity [X/TIME] Price [DEPT SHIFT] [DEPT]
Preset Department type
Quantity [X/TIME] Quantity [X/TIME] [Preset DEPT]
Quantity [X/TIME] Quantity [X/TIME] [DEPT SHIFT] [Preset DEPT]
(2) PLU
Open PLU type
Quantity [X/TIME] Quantity [X/TIME] Price [PRICE] Open –PLU Code [PLU]
Quantity [X/TIME] Quantity [X/TIME] Price [PRICE]
[PLU Preset-Code Key] of Open-PLU
Preset PLU type
Quantity [X/TIME] Quantity [X/TIME] PLU Code [PLU]
Quantity [X/TIME] Quantity [X/TIME] [PLU Preset-Code Key]
NOTES: 1. Quantity: Max. 3 integral + 3 decimal digits (Use the [.] key to enter the decimal digits.)
2. When each department or PLU is preprogrammed with HALO (High Amount Limit)/LALO (Low
Amount Limit), depressing the [LC OPEN] key will release these limits.

9- 9
EO1-11149
9.13 Square Multiplication