Remote Slip Printer (Hardware Option) Operation; When A Power Failure Occurs - TEC MA-1535-2 series Owner's Manual

9. REGISTERING PROCEDURE AND PRINT FORMAT
9.54

Remote Slip Printer (Hardware Option) Operation

The Remote Slip Printer may be connected to the MA-1535 series ECR as an optional device.
The Remote Slip Printer will operate printing if a slip is properly inserted.
1. The remote slip printer will automatically activate printing when the slip has properly been set to the
printer table.
2. The following are selective status programmable relating to the remote slip printer. Ask the store
manager and mark the status selected for your store.
• Remote Slip Print in "REG" mode
• Code No. (Cheque No.) Entry Before [CHECK NO.] key at Endorsement Print (Refer to
ENDORSEMENT PRINT operation already stated.)
• Print selection by [CHECK NO.] key
9.55

When a Power Failure Occurs ...

If a power failure occurs, all sales data stored in the memory are automatically protected by the battery
installed in the ECR. As the power returns, the register revives to continue the work and displays the
last item entered before the power failure.
9.54 Remote Slip Printer (Hardware Option) Operation
9-42
EO1-11149