Dp And Financial Read And Reset - TEC MA-1535-2 series Owner's Manual

3. READ (X) AND RESET (Z) REPORTS
3.3.21 DP and Financial Read or Reset
OPERATION
Control Lock: X for read, Z for reset
[AT/TL]
NOTES: 1. Printing will be cancelled by depressing the [C] key during report print.
2. The different DP Report will be printed in each conditions below; when Department and PLU
Sales Ratio on Reports is not programmed in Print Item on Reports Setting, and when
Department and PLU Sales Ratio on Reports is programmed in Print Item on Reports Setting.
However, the Financial Report will be completely same in these conditions.
When Department and PLU Sales Ratio on
Reports is NOT programmed in Print Item on
Reports Setting
When Department and PLU Sales Ratio on
Reports is programmed in Print Item on
Reports Setting
DP Report
3-25
EO1-11149
3.3 Report Samples